Tenant just gave notice on one of my units and I'm realizing my turnover checklist is basically all cosmetic: paint touch ups, deep clean, check the appliances work. Nothing on it actually looks at how old anything is. feels like the gap between tenants is the one time you can actually get eyes on a system without disrupting someone's life, but I ve never used it that way.
For those of you who've been doing this longer, is there anything you check during turnover specifically because it's easier to do with the unit empty? Curious what I'm missing.
Honolulu, HI · Member since 2008 · 3k+ posts · 2k+ votes
2mo
Simple. You check everything. Preventative maintenance and repairs are always less costly than remediation. That increased cost comes from your phone/messaging time, extra trip charges, and potential significant inconvenience that could require compensation to the tenant. Not to mention the general aggravation.
Every room, every outlet, switch, and fixture. Doors and windows. Walls, floor, ceiling. Inside of every cabinet and sink base. Using a flashlight. Operate every appliance and plumbing fixture, listening to see if they "sound" normal and function properly.
Every time you are in a unit, you should be observing. Looking for signs of water intrusion, pests, and, when occupied, poor housekeeping. You never don't look for these issues.
Exteriors, including roof, should be visually inspected at least annually as well, and again, you should be observing anytime you approach the property.
Honolulu, HI · Member since 2008 · 3k+ posts · 2k+ votes
2mo
Simple. You check everything. Preventative maintenance and repairs are always less costly than remediation. That increased cost comes from your phone/messaging time, extra trip charges, and potential significant inconvenience that could require compensation to the tenant. Not to mention the general aggravation.
Every room, every outlet, switch, and fixture. Doors and windows. Walls, floor, ceiling. Inside of every cabinet and sink base. Using a flashlight. Operate every appliance and plumbing fixture, listening to see if they "sound" normal and function properly.
Every time you are in a unit, you should be observing. Looking for signs of water intrusion, pests, and, when occupied, poor housekeeping. You never don't look for these issues.
Exteriors, including roof, should be visually inspected at least annually as well, and again, you should be observing anytime you approach the property.
Capital planning – document the condition of the roof (if applicable), water heater, HVAC, windows, and other major components so we know what's likely coming over the next few years.
That last piece has been especially helpful when planning owner budgets.
Tenant just gave notice on one of my units and I'm realizing my turnover checklist is basically all cosmetic: paint touch ups, deep clean, check the appliances work. Nothing on it actually looks at how old anything is. feels like the gap between tenants is the one time you can actually get eyes on a system without disrupting someone's life, but I ve never used it that way.
For those of you who've been doing this longer, is there anything you check during turnover specifically because it's easier to do with the unit empty? Curious what I'm missing.
That's actually a great time to be proactive instead of just handling cosmetics. I always use turnovers to check things that are hard to inspect when someone is living there, like looking under sinks for slow leaks, checking shut-off valves, testing GFCIs, inspecting the water heater and HVAC filters, looking for signs of roof or plumbing leaks in the attic or basement, checking caulk around tubs and windows, and making sure smoke and CO detectors are up to date. I'll also tighten loose hardware, inspect flooring for soft spots, and take a good look at the electrical panel if it hasn't been checked in a while. Spending a few extra hours during turnover has saved me from a lot of emergency calls later. Happy to connect and answer any questions you have!
Tenant just gave notice on one of my units and I'm realizing my turnover checklist is basically all cosmetic: paint touch ups, deep clean, check the appliances work. Nothing on it actually looks at how old anything is. feels like the gap between tenants is the one time you can actually get eyes on a system without disrupting someone's life, but I ve never used it that way.
For those of you who've been doing this longer, is there anything you check during turnover specifically because it's easier to do with the unit empty? Curious what I'm missing.
We replace the AC filter for our tenants every 3 months. Which means we do a quick inspection of the interior every 3 months. Don't wait until turnovers to look for things that need fixing. When you do have a turnover, @Richard F. said it best "Simple. You check everything."
Real Estate Broker · Atlanta · Member since 2024 · 1k+ posts · 606 votes
2mo
@Giuseppe Cavucci Besides the cosmetic items, I always inspect the HVAC, plumbing for leaks, water heater, electrical outlets, smoke detectors, caulking, locks and for any signs of roof or moisture issues. It is also the perfect time to rekey the locks and address deferred maintenance before the next tenant moves in.
Investor · Milwaukee - Mequon, WI · Member since 2010 · 5k+ posts · 7k+ votes
2mo
Everything, but to be more specific: we keep a list of capex items that near the end of their design life.
That of course includes the items you'd expect like roof, HVAC and water heater. But we also add off items like a large old tree or a deteriorating concrete driveway.
Things like driveways, we sort worst to best and replace a few every year.