Anyone using any water monitoring devices for leak detection or for separating utilities? If so how do you handle the devices need for a WIFI connection? Are you using your tenants WiFi, or are you getting your own separate WiFi just for that purpose?
if the house is rented by the room, the wifi is already in your name, so the sensors just go on your network. that's the easy case.
for a whole house rented to one tenant I wouldn't put anything on their wifi. they change the password, swap the router, or cancel the plan the week they move out, and that's exactly when a leak can sit for days in an empty house. two ways around it: sensors with their own hub that uses cellular, or a cheap internet plan in your name just for the devices. put that monthly cost next to one floor of water damage and it usually pays for itself.
for splitting utilities with a meter, check your state's rules first. some states limit how you can bill tenants off a private meter, and either way the lease should say how it's split before move-in, not after.
last thing: put a line in the lease that the devices are there, that they stay plugged in, and that you'll get an alert and may need to come in if one goes off.
if the house is rented by the room, the wifi is already in your name, so the sensors just go on your network. that's the easy case.
for a whole house rented to one tenant I wouldn't put anything on their wifi. they change the password, swap the router, or cancel the plan the week they move out, and that's exactly when a leak can sit for days in an empty house. two ways around it: sensors with their own hub that uses cellular, or a cheap internet plan in your name just for the devices. put that monthly cost next to one floor of water damage and it usually pays for itself.
for splitting utilities with a meter, check your state's rules first. some states limit how you can bill tenants off a private meter, and either way the lease should say how it's split before move-in, not after.
last thing: put a line in the lease that the devices are there, that they stay plugged in, and that you'll get an alert and may need to come in if one goes off.
Thank you for that! Getting a cheap WiFi plan just for the meter sounds like a good idea. I wasn’t aware that there were any limitations on being able to bill tenants off of private meters so thank you for that info as well!
We put leak detection devices on dishwashers and hot water heaters, as well as automatic shut-offs on washing machines. We do not connect them to any Wi-Fi.
Harrison covered the WiFi side well, and keeping the sensors off the tenant's network is the right call. The part I'd plan just as carefully is what happens once one of them goes off, because an alert nobody acts on quickly still ends with a wet floor.
Before the devices go in, I'd settle three things. Send the alert to you and one backup person, so it never depends on one phone. Write the tenant's text ahead of time, something like: "Your leak sensor under the water heater just went off. Please check for water, turn the shutoff valve by the heater if you see any, and send me a photo." And line up a plumber who has agreed to take these calls from you, so you're not searching for one with water on the floor.
Then test each sensor and its batteries at every turnover, so you know they'll work when it counts.