Real Estate Broker · Cape Coral, FL · Member since 2015 · 2k+ posts · 1k+ votes
I've owned and managed rentals in Florida for almost two decades. One thing I always walk owners through, even though they rarely ask up front, is the maintenance limit. On the homes our company manages, that limit is $500. If a tenant puts in a work order for something like a toilet or a ceiling fan that costs $300 to $400, we just fix it and take care of the tenant. For anything over $500, we contact the owner and ask how they'd like to proceed.
A refrigerator is a good example. If it dies, we don't just swap it out. We bring the owner a repair quote, a used-refrigerator price, and a new-refrigerator price, and they decide. Those prices change by house and by year, so I won't pretend there's one right number. The process is the same every time: small stuff gets handled so the tenant isn't waiting, and the bigger calls stay with the owner.
If you self-manage 50 units or less, or you work with a manager, where did you set that limit? Has a tenant ever been stuck waiting because a $300 repair needed a phone call first?
We have learned the hard way that modifying our Maintenance Owner Approval Threshold is NOT a good idea.
The owners that want it lower, usually are the problem owners.
We do modify our Portfolio Minimum, which usually equals the threshold, for numerous properties, as it's unlikely ALL an owner's properties will need maintenance in the same month.
Stuff like a HWH replacement would fall under our emergency contract language.
NOTE: a common complaint we hear from owners transferring their rentals to us is their previous PMC never told them about the under threshold work orders. They didn't find out until they got their monthly Owner Statement and saw the charges.
Our standard procedure is to alert the owner about ALL maintenance issues as soon as we have a decent understanding of the maintenance issue. We then send them the invoice and completion proof.
That dollar amount limit should be dependent upon local pricing, and also should cover most routine items. I include standard water heater replacement, toilet, kitchen or bath sink and faucet, and major appliances...all individually of course, as "routine". Also typical waste line cabling to vertical. Our standard monthly limiting amount was generally equal to a month rent for the unit. You can't get a water heater changed by licensed and insured vendors for less than about $1100, and under cabinet units, which are prevalent here, are always more due to usual level of difficulty. We also generally maintained $1000 or more as reserve for issues that occurred after owner NET rental was disbursed. There were a handful of accounts that insisted on lower amounts, but generally their units were also B+ or A units; or they had multiple properties with us and allowed/requested us to transfer between them when necessary, and always with authorization at the time.
Our view was that the rental agreement was between the tenant and our company, so whatever happened, we were The Bad Guys, so we made sure there was no "waiting" on authorization for tenants, with thorough preps and regular inspections to keep owner apprised of conditions. Also, the management contract is clear that we are hired to "manage" the property, and we do so as if it were our own long term rent and hold. You have to also consider local law regarding timing requirements for response, which varies by locale. We did not require written estimates for routine items, but did require tech comments for findings as well as direct call from them on arrival at site to inform of findings and provide verbal estimate before proceeding. Similarly, for turnovers, most were minimal and we just processed, providing pics and line item invoices to owner. For anything truly significant, I would report to owner with email report and pics, call and discuss, but ultimately would proceed to our usual standards in most cases. Over time, the owners did understand the relationship between a quality unit and a quality tenant, and ultimately were pleased with long term outcomes of low vacancy, long tenancy, market rents, and low subsequent turnover costs.
We have learned the hard way that modifying our Maintenance Owner Approval Threshold is NOT a good idea.
The owners that want it lower, usually are the problem owners.
We do modify our Portfolio Minimum, which usually equals the threshold, for numerous properties, as it's unlikely ALL an owner's properties will need maintenance in the same month.
Stuff like a HWH replacement would fall under our emergency contract language.
NOTE: a common complaint we hear from owners transferring their rentals to us is their previous PMC never told them about the under threshold work orders. They didn't find out until they got their monthly Owner Statement and saw the charges.
Our standard procedure is to alert the owner about ALL maintenance issues as soon as we have a decent understanding of the maintenance issue. We then send them the invoice and completion proof.
Yes, we do not lower this amount but we do have owners that have increased it on their own. It is a flag for us that the owner may micromanage which effects the level of customer service that we can provide to the tenant and the efficiency of our team.
@Adam Bartomeo, good day. The three-price choice keeps the owner in the decision without slowing the tenant down. One step that helps on top: keep each of those decisions on the house record. When the same item fails a second time, the owner sees the first repair price next to the replace price, and the call takes a minute.
Do any of your owners set a rule like that, replace on the second failure?
The money really depends on the property and the owner. The important thing is agreeing on that limit upfront. I don’t want a tenant waiting several days for approval on a $300 repair, but I also don’t want a manager making a $1,500 decision without talking to me. The manager needs enough authority to handle the small stuff quickly, while the owner stays involved when the expense becomes meaningful. Getting that agreement upfront can save a lot of frustration on both sides.
It becomes a little difficult to manage hundreds of owners and all of their diffent requests while keeping our company expenses low enough to be profitable. Having a single maintenance limit for all owners is very efficient and lowers human error.
When I self-managed my Orlando rentals, there was no threshold. They were my properties, so every call and every repair was on me.
Today I'm on the short-term rental side. I have an STR arbitrage deal in Jacksonville: I rent the home from the owner and run it as a short-term rental, and the agreement puts every repair under $500 on me. The owner only hears about the bigger items. It's worked well: the owner isn't fielding toilet calls, and my guests aren't stuck waiting on phone tag.
On the STRs I co-host for other owners (disclosure: that's my business), it's the same $500 line. It's written into our contract: anything under $500 I'm authorized to approve, and anything over it goes to the owner.
I agree with Drew on telling owners about the under-threshold work anyway. A $300 charge an owner first sees on a statement feels a lot bigger than one they heard about the day it happened.
We do something close to this. Two things made it work for us: the limit is written into the lease and the vendor's scope letter, so nobody has to call for permission, and every approved repair gets a photo before and after in the tenant's file. The photos have saved us more than once at move-out when the "it was already broken" argument comes up. Do you adjust the number for older buildings?
No we do not adjust the amount for newer or older. A toilet replacement is the same no matter the age of the building. Also, we learned quickly not to allow the vendors to know how much the approval is. At one time they were able to see the limit of $250 and every repair was coming in at $240 -$250. The vendors have to communicate with us for every repair. We have a maintenance team so that helps with controlling the expenses.
From the self-managing side, the owner and the approver are the same person, so the dollar limit matters less than having the decision rules written down before the call comes in. What tends to help:
A short repair-authorization sheet: what counts as an emergency (no heat, active leak, no water, sewage, lockout) and gets dispatched immediately, versus routine items that can wait for a quote.
A not-to-exceed amount you give each vendor up front, so a $300 toilet repair doesn't need a second phone call.
A repair reserve per property sized to the most likely big-ticket failures (water heater, HVAC part), so authorizing a fix isn't a cash-flow decision.
One log per unit with the date, item, cost, and photos. It shows repeat failures and doubles as the record at move-out.
The same sheet goes into the lease packet, so tenants know which issues get same-day service.
We land in a similar spot, with the limit written into the management agreement. Even on repairs under the limit, where we don't need the owner's OK, we usually still give them a quick heads up the same day. It isn't required, but it builds a better relationship with the owner and nothing is a surprise on the statement. The piece I'd add is a separate emergency rule that ignores the dollar amount. Active leak, sewer backup, no heat on a cold night, we act first and call the owner while the vendor is on the way. Waiting on a callback over a $1,100 water heater while water is on the floor costs more than the water heater.
We have an emergency clause built in. We have always had it there but during hurricane Ian we didn't have elec, phones, or internet for weeks. We had to make calls to protect the tenants and the property from further damage. It has happened with WH leaks in the past as well.
We use a limit like this too, and the part that matters is not the dollar number. It is that the tenant does not wait while two people decide. Our rule is simple: anything that affects heat, water, safety, or a working toilet gets fixed first, then we tell the owner what it cost. For the rest, we fix it under the agreed limit and send the invoice and photos the same day. No surprise charges later. The limit only works if it is in writing before the first repair. We put it in the management agreement, with a list of what counts as an emergency, and a note that a repeat failure gets a second look instead of a second patch. The one thing I would add is a monthly summary. Even small repairs add up, and owners trust the limit more when they can see the pattern.
Thanks for sharing the process, Adam. The part I like most is that the owner still makes the bigger calls with a repair quote and a replace quote side by side. Do your owners ever want to adjust the limit for older homes where small repairs tend to snowball?
Good breakdown Adam. I run the same way, $500 limit is the sweet spot. Under $500 we just fix it and move on, tenant happy, no delay. Over $500 we call owner with 2-3 options - repair, used, or new - and let them decide. The worst thing is a tenant waiting 3 days for a $300 toilet fix because of a phone call. How do you handle it when it's a fridge? Do you still let owner pick, or you just replace to keep tenant from leaving?
I've owned and managed rentals in Florida for almost two decades. One thing I always walk owners through, even though they rarely ask up front, is the maintenance limit. On the homes our company manages, that limit is $500. If a tenant puts in a work order for something like a toilet or a ceiling fan that costs $300 to $400, we just fix it and take care of the tenant. For anything over $500, we contact the owner and ask how they'd like to proceed.
A refrigerator is a good example. If it dies, we don't just swap it out. We bring the owner a repair quote, a used-refrigerator price, and a new-refrigerator price, and they decide. Those prices change by house and by year, so I won't pretend there's one right number. The process is the same every time: small stuff gets handled so the tenant isn't waiting, and the bigger calls stay with the owner.
If you self-manage 50 units or less, or you work with a manager, where did you set that limit? Has a tenant ever been stuck waiting because a $300 repair needed a phone call first?
I had help drafting this and edited it myself.
Great point. I think having a clearly defined maintenance limit is one of the most important things a property owner and property manager should establish upfront.
The $500 threshold makes a lot of sense. It allows management to address smaller issues quickly, keeps tenants satisfied and prevents minor maintenance requests from turning into bigger problems simply because someone is waiting for approval.
I also like your approach to providing owners with multiple options for larger expenses rather than making decisions on their behalf. Transparency and communication go a long way in protecting both the property and the owner's investment.
From an investor's perspective, I would add that having a dedicated maintenance reserve is just as important as setting the approval limit. Unexpected repairs are part of owning rental property and having funds readily available helps avoid unnecessary delays.
Ultimately, the goal should be to protect the asset, control expenses, and keep good tenants happy. A little planning upfront can prevent a lot of headaches down the road!
When we used PM companies in the past they had the $300 threshold. When ever I received an owners statement and something was replaced or fixed and I saw the itemized bill always had questions. Prior to moving away from the PM company that we were using in Florida after receiving the statement I shopped the service performed and realized I was able to get better pricing. This was the tipping point for me personally. Yes I understood the PM company had the licensed vendors they used and trusted, but honestly it isnt that tough to build relationships yourself if you put in the time. Now that we self manage our units, one of the things we are often told is how tenants appricate how fast we can handle repairs, appliances breaking etc. WE have an advantage as we do not have to chase down an owner that may not want to spend the money. If a PM company can be totally transparent on pricing and have a great realtionship with owners I dont see an issue with increasing the limit, or even possibly having items that can be replaced if the life of an appliance is say 9 years old and a new one costs $500.
$300.00 is the pre-approved limit in the agreement. Habitational issues, water, heat, flood, etc. state law comes into play and we go and fix since we're technically liable to secure and neutralize the issue in the property; regardless of cost. A complaint from a tenant with no water or heat is can be much worse for the landlord than a service call.
The number matters less than having a written rule your manager or vendor can follow without calling you. I sort repairs into two buckets. Anything affecting habitability, water, heat, safety, or a tenant being unable to use a toilet or shower gets fixed the same day, no approval needed up to a reasonable cap. Everything else can wait for a quote. The cap should match the trust level and the job. With a vendor I know, a $500 limit for routine fixes is reasonable. With someone new, I keep it lower until they prove their pricing. The real time saver is the process around it: one written scope, photos before and after, and the invoice matched to the property the same week. If you find yourself approving the same $300 fix twice, the problem is not the cap, it is that nobody fixed the cause. Set the limit, put it in writing, and review the spend monthly.
We have "emergencies" built into our PMA and we have passed on owners that want us to change it. After going through a Hurricane like Ian every owner should want their PMC to be able to make emergency decisions. We had not elec, phone, or internet for 2 full weeks, and spotty for months.
I'm on the other side of that line, small HVAC shop. $500 makes sense to me — tenant's not waiting on a toilet, owner's not getting nickel-and-dimed on every little thing. No argument there.
My gripe is what happens after a quote goes out. Water heater dies on a Friday, tenant's got no hot water, I send the owner a $620 quote and it just... sits. Owner's busy, or the email got buried, whatever. Monday the tenant's calling me, Tuesday the manager says still waiting on the owner, and by Wednesday I've got a family cold-showering and nobody can tell me where that quote actually is. Week goes by, the job's still mine, the tenant hates my name, and I'm the one who looks slow.
The dollar amount was never the problem. The problem is the quote leaves my hands and becomes a black box — who said yes, who still owes me, what's dead — nobody can answer in ten seconds.
Real question: what's the longest a quote sat with one of your owners before you got a yes or no? You track it, or does it just die in the inbox?
A couple of things. We have built into our PMA that if there is an emergency we do not need the owner's permission. Hot water in most states is a necessity, and we can make that call. We still reach out to the owner first but if we don't hear back from them in a reasonable time frame the team lets me and I make the call on moving forward or not. Second, some quotes sit for months. IE I have an AC replacement quote that I will not approve. The AC works but we keep having to band aid it to keep it running. It sits while we build relationships with other AC vendors and see if they are willing to install a new one at a reasonable price.
@Adam Bartomeo just thought of this while reading the additional remarks after I posted mine - I NEVER assume I know everything, so am always trying to learn:)
How do you handle Work Orders with several Tasks, where each individual Tasks will be under $500, but they add up to > $500?
We've adopted an "All for < $500 or Submit a Bid" approach.
We had too many ServiceTechs doing up to $500 of work and then bidding the rest.
We didn't think that was fair to Owners.
One other thing we also included in our PMA is that we can't Self-Approve more than $1,000 in total Work Orders each month w/o an owner approval.
This keeps owners from having to deal with, "death by 1,000 papercuts" from multiple < $500 work orders.
Our criteria is normally $500 per vendor per wo. So a bunch of small items to one vendor is still $500 but if the ac also went out and HVAC has to be sent out, $500 for them. "We had too many Service Techs doing up to $500 of work and then bidding the rest." Our vendors have to get permission for everything. So, they cannot pull that crap. Only our techs have the ability to go up to $250 and have to get approval from the MC for anything above that. Our team is hourly which removes trying to jack up prices for getting extra hours, they get paid no matter what the outcome is.