Avoiding city (building) inspectors and code enforcement

Avoiding city (building) inspectors and code enforcement

Real Estate Investor · Las Vegas, NV · Member since 2015 · 16 posts · 10 votes

We just recently started house renovation and got red tagged by the city inspector. I guess he saw dumpster while driving around or maybe neighbors complained. So we learned never leave dumpster in city limits.

  • Could you share your strategies on how to avoid city inspections/code enforcement on extensive renovations?

Much appreciated

3Reply
732 views

Most Popular Reply

Investor · Clairemont, CA · Member since 2011 · 3k+ posts · 2k+ votes
3y

Pull permits for any work requiring one...

See this reply in the discussion

82 Replies

Jump to latestLatest
  • Investor · NH · Member since 2023 · 54 posts · 25 votes
    3y

    It is always better to pull permits and have the work inspected for two main reasons.

    1.) The local inspectors can make you rip your home apart if/when they find out you did work without having it inspected. 

    2.) Whoever you sell the home to will likely want to see proof that you had the work inspected and the house is up to code.

    Since you already got red tagged maybe you can tell them you aren't planning to spend over $1,500 on demo because you're doing it yourself.. but you should make contact with the inspector and start getting your permit lined up to avoid issues down the road.

    Tell them you want to comply, you just jumped the gun on demo. 

  • Rental Property Investor · Boston, MA · Member since 2019 · 2k+ posts · 1k+ votes
    3y

    Pull the permits. It's never worth the other options!

  • Real Estate Broker · Minneapolis, MN · Member since 2011 · 5k+ posts · 6k+ votes
    3y
    Quote from @Todd Jones:

     The OP (@Alexander P.) is referring to major things like the entire plumbing and an electrical box. 
    I won’t disagree too much regarding very small items like a light fixture but it’s subjective. A “light item” not done to code like a adding a dishwasher can become serious if the details aren’t addressed or if it looks “good enough” hence the reason for codes. You’re responsible for it. The unlicensed contractors could care less and implement stuff lying around you’ll never see (thinner pipe, wiring, loose connections that move from vibrations such as walking, etc). 

    Feel that you’re smarter than the others? What’s the big deal?

    In all, you can get away with something a thousand times…but it only takes one time. Then it’s over. 


    Talking with a fire investigator once (following out a fire-house lead) I asked, out of curiosity, what he as a fire investigator saw as most common causes. Hey, why not learn something right, I had the authority on the matter right there. 

    He said hand's down, by a big margin the most common was DIY "stuff" and outlets of various kinds. He said he saw it all the time, that it was rarely any of the big things, it's those "little things" that people think isn't a big deal. But done wrong, yeah, they matter a lot. 

    Makes sense, persons saying "ah, it's an outlet/ light/ fan, anyone can do that". Well, it's the same electricity and done wrong, heat, ignition, "poof" fire. 

    And feel free to not believe me, ask an insurance broker what happens if there is a fire and cause is found as DIY electrical work at a receptacle. Ask how that effects coverages. 

    Permits PROTECT owners. They transfer liability from property owner to others. That has significant value. 

  • Bruce WoodruffPro Member
    Contractor/Investor/Consultant · San Diego / Phoenix · Member since 2021 · 12k+ posts · 15k+ votes
    3y
    Quote from @Account Closed:

    It is always better to pull permits and have the work inspected for two main reasons.

    1.) The local inspectors can make you rip your home apart if/when they find out you did work without having it inspected. 

    2.) Whoever you sell the home to will likely want to see proof that you had the work inspected and the house is up to code.

    1) Been there done that on a house I bought and was trying to flip. The previous owner hadn't gotten permits and the Inspector made me take off electrical plates and show him the grounds.....

    He also wanted to see the rebar in the slab.....I said "what do you want me to do, X Ray it?" He said, yes, and jackhammer up a 10'x10' section as well.

    2) Any good Home Inspector nowadays is suggesting in their report that the prospective buyer call the city and check permit status... 

  • Flipper/Rehabber · Huntsville, AL · Member since 2019 · 117 posts · 57 votes
    3y

    @Michael S. I believe this is only true if the homeowner pulls the permits themselves.

  • Bruce WoodruffPro Member
    Contractor/Investor/Consultant · San Diego / Phoenix · Member since 2021 · 12k+ posts · 15k+ votes
    3y
    Quote from @James Hamling:

    Yep. Loose wires = arc = spark = fire....

    I can't believe we're having this conversation to be honest......

  • Member since 2023 · 243 posts · 199 votes
    3y
    Quote from @Bruce Woodruff:
    Quote from @James Hamling:

    Yep. Loose wires = arc = spark = fire....

    I can't believe we're having this conversation to be honest......

    Same but I do feel very optimistic seeing the reactions from others. If a majority said “A permit for an electrical box installation is not cost effective”, I’d feel creeped out.
Join the conversationCreate a free account to reply, vote on answers and follow this thread.