Renovating Rentals Like a Commercial Super

Renovating Rentals Like a Commercial Super

Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes

I'm a senior superintendent in commercial construction (13+ years). These days that's lab and healthcare renovations, before that hotels and restaurants. Since 2017 I've been buying and holding in Massachusetts and Philly, and every deal has been the same play: renovate to force equity, then hold.

On a buy-and-hold, the reno has two jobs: raise the value enough to matter at appraisal or refi, and hold up to tenants for years.

Here's where I see investors lose money on that, and how a commercial job would handle each one:

1. Treating the contractor's number as the budget. A contractor's number isn't a budget until you understand what's excluded. On commercial jobs, the exclusions list is often more important than the price. Ask every bidder: what's not in this number? Permits? Dumpsters? Patching after the electrician? Final clean?

2. No real contingency. A contingency should reflect how much you don't know. A cosmetic refresh on a rental in good shape and a gut of a 1920s two-family should not both get "10%." The more walls you're opening, the higher it goes.

3. Pulling permits after demo starts. Inspectors don't like surprises, and neither do lenders. Get the permit path figured out before the first wall comes down.

4. Bad sequencing. Closing walls before rough inspections. Painting before the electrician is done. Installing finished floors before the heavy trades finish. Every out-of-sequence step means rework, and you pay for it.

5. Ignoring lead times. Windows, electrical service upgrades, and custom items can stall a job for weeks. On commercial work we order long-lead items first. On a rental reno, nobody even asks until the unit's sitting empty.

6. Verbal change orders. "Yeah, just add it" is the most expensive sentence in construction. Get it priced in writing before the work starts.

7. Underestimating the finish line. Punch list, final inspections, and sign-offs are where renos sit for weeks at "almost done," and every week vacant is lost rent and pushes out your refi. Schedule them like real tasks.

8. Spending on finishes the appraiser won't pay for, or tenants will destroy. The commercial mindset is to spec for the life of the building. For a rental: spend where it moves value (layout, kitchens, baths, adding a unit or bedroom) and pick finishes for durability, not Instagram.

My own first property is a good example of both sides. I renovated it like I was going to live there: higher-end finishes and appliances, everything I wanted to see. Then my commercial job relocated me for a new project, and that house became a rental.

The finishes didn't hurt me. I landed a great long-term tenant who stayed the entire time I owned it. But looking back, a mid-grade appliance package and less expensive tile in the bathrooms would have rented just as well, and I'd have kept the difference. And when that tenant moved out, years of no cleaning or upkeep meant close to $5K to clean, repair, and get it ready to sell. High-end finishes don't protect you from wear. They just cost more to replace.

I'm going to start posting real numbers from my own deals: bid vs. actual, what the equity bump actually was, permit problems, and what I'd do differently.

What's the construction surprise that hurt you most on a deal? Drop it below. I'll pick a few and break them down like a super would.

P.S. On my very first rental, a Philly row house, we opened the front facade for a window repair and found the brick ties failing across the entire face. That was a $13K surprise nobody budgeted for. I'll break that one down next week.

0Reply
751 views

Most Popular Reply

Member since 2026 · 10 posts · 2 votes
6d

Chris, so, one category I'd watch in older rehabs is water at the exterior-wall and roof junction. A small leak or poor drainage can sit unnoticed, then show up after new drywall or floors go in. Before locking the scope, I'd walk after rain if possible, check the attic and basement or crawlspace for stains or musty odor, look at flashing, gutters and where downspouts discharge, and note soft trim or staining at windows and doors. If anything looks questionable, have the contractor price a small exploratory opening and the source correction separately from the visible finish repair. That keeps a bid from covering the patch while missing the condition feeding it. I'd also put a dry-framing and rough-ins check before insulation and drywall on the schedule, so the work doesn't get closed up until water is handled. What hidden issue have you seen most often behind otherwise clean-looking walls?

See this reply in the discussion

14 Replies

Jump to latestLatest
  • Member since 2026 · 10 posts · 2 votes
    6d

    Chris, so, one category I'd watch in older rehabs is water at the exterior-wall and roof junction. A small leak or poor drainage can sit unnoticed, then show up after new drywall or floors go in. Before locking the scope, I'd walk after rain if possible, check the attic and basement or crawlspace for stains or musty odor, look at flashing, gutters and where downspouts discharge, and note soft trim or staining at windows and doors. If anything looks questionable, have the contractor price a small exploratory opening and the source correction separately from the visible finish repair. That keeps a bid from covering the patch while missing the condition feeding it. I'd also put a dry-framing and rough-ins check before insulation and drywall on the schedule, so the work doesn't get closed up until water is handled. What hidden issue have you seen most often behind otherwise clean-looking walls?

    • Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes
      6d

      Agree 100% on water. Chasing water can be catastrophic. It finds its way through anything. Walking during or after a rainstorm is a veteran move that often gets overlooked, especially on new roofing, and mitigation gets expensive fast. That’s why we typically price exploratory openings separately from the finish repair on commercial jobs, usually tracked on a time-and-material basis.

      The hidden issue I find most on renovations, residential and commercial, is failing studs. Usually metal studs, rusted out by water nobody saw. One job sticks out: a full reno of an operating kitchen where years of leaks had turned the bottom track to dust. We stripped all the FRP and drywall 4' up, ran fans, and replaced track and studs before anything could close back up.

      The other big one that comes to mind is failing masonry ties and flashing on older brick. Funny enough, that’s next week’s post: $13K worth of it on my first row house.

  • Realtor · Memphis, Shelby County · Member since 2026 · 483 posts · 159 votes
    6d

    Chris, this is a masterclass in one post — thank you for writing it up so clearly. The one that lands hardest for me is #1, treating the contractor's number as the budget. On the Memphis rehabs I see, the exclusions are where the surprises live, and a bid that looks cheaper on paper rarely is once permits, dumpsters, and patching get added back in. Your contingency point is right up there too — a cosmetic refresh and a gut job should never carry the same percentage. And the finish-line point is so real: those last weeks at 'almost done' are the most expensive weeks of the project when the unit is sitting empty. What I see most often on the rehab side here is the hidden stuff nobody scoped before pricing — sewer lines and old electrical, for example. Looking forward to your numbers posts — this is exactly the kind of detail new investors need.

    • Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes
      6d

      Thanks Ametria. On residential jobs, the lowest number usually wins. On commercial, the lowest number always triggers the question: “What are they missing?”

      The end of a job hides surprises too. It looks like the most progress, but it exposes the most skeletons. One other thing people rarely plan for is how long final inspections and permit closeout take, and how much inspector schedules slip, especially around the holidays.

      Sewer lines and old electrical are a great call. I just did a 200A service upgrade on my own house before touching anything cosmetic, for exactly that reason. Systems and structure first, finishes second. Do you see investors in Memphis scoping sewer cameras before closing, or finding out after?

  • Noah WrightBusiness Member
    Lender · USA, Nationwide · Member since 2024 · 613 posts · 174 votes
    5d

    Chris, the gap between a contractor’s number and the finished project is what matters for the appraisal and refinance. Ask each bidder to show quantities and unit costs for the major work, then check that the scope matches the condition and finish level you’re underwriting. A low total is hard to judge if one bid includes a full electrical allowance and another only includes visible repairs. The refinance depends on the completed property and its appraisal, so make sure the budget and scope describe the same finished product.

    • Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes
      2d

      Agreed, and that’s the same thing we do on commercial jobs -bid leveling. Before we compare totals, every bidder prices the same scope sheet, and each one has to list what they include, what they exclude and what they’re carrying as an allowance. If one electrician carries an allowance for "panel upgrades" and another prices a spec'd panel and rewire, those aren’t two prices for the same job. They’re two entirely different jobs.

      I’d add one thing: Generate the scope from the finished product backward. Pick the finish level your comps support, and spec to that. Spending past what the appraiser is going to credit is the mistake I made on my first property.

      Question for you from the lending side: when you underwrite a reno or refi - what do you typically want to see in the contractor’s scope? A line-item budget, a finish schedule, something else? I would assume most investors send far less than you’d like.

  • Member since 2026 · 68 posts · 27 votes
    4d

    The exclusions question is what turns a contractor's number into a real budget, and on a hold it matters even more because the work has to last through years of tenants. Since you already own in Philly, the harder part is often finding the next property worth that discipline. For the city of Philadelphia we gather recent residential permit filings and vacant structure violation cases from official records, one time, not a subscription, which shows where renovation is starting and where buildings are sitting vacant with open violations. Is the city of Philadelphia where you plan to add next?

    • Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes
      2d

      Hey Jeremy - I sold my Philly property in 2022. Currently, I’m focused on the Boston area, closer to home and my day job.

      Agreed on exclusions, though. On a hold, a gap in the scope doesn’t stay a one-time cost. You pay for it again at every turnover.

  • James JonesPro Member
    Investor · Collierville, TN 38017 · Member since 2017 · 1k+ posts · 774 votes
    4d

    Chris, the surprise that hurts me most is finding out the house cannot add the bedroom or bathroom the numbers were built on. I buy single-family BRRRR deals in Memphis under $100K, and my best rehabs are conversions: a 2/1 to 3/1 or a 3/1 to 4/2. That extra bedroom is what moves Section 8 rent to $1,395-$1,950 for a 3BR+ and gets the ARV to $180K-$265K.

    If I walk a house and the layout will not convert, or the half bath cannot become a full bath, the deal is dead, no matter how good the contractor's number looks. The rehab has two jobs, just as you said: raise the value enough to matter at refinance, and hold up through years of tenants. I refinance at 70-80% LTV on DSCR, so the finished house has to appraise and rent on the numbers I underwrote.

    I walk every house in the first 60 seconds and count beds and baths before I price anything else. That is the surprise I check for first.

    • Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes
      2d

      James, that’s definitely the right filter. The super version of the same walk adds another 60 seconds: can the conversion actually be built and pass inspection?

      For the bedroom, I'm generally looking at egress first. Most codes want the opening big enough to climb out of and a sill low enough to reach it. If the room doesn't have one, you're cutting the wall and adding a header, exterior costs etc and that's a different budget. An unpermitted bedroom can also get knocked out at appraisal, and then the ARV you underwrote isn't there.

      For the half bath to full, I’m looking for where the stack is, what’s under the floor, and whether there’s room for a shower without moving walls. The drain and vent route usually decides it, not the square footage (for me).

      Question for you: on your 2/1 to 3/1 conversions, what kills more deals - egress or the bathroom plumbing?

  • Real Estate Broker · Philadelphia, PA · Member since 2026 · 15 posts · 4 votes
    2d

    Good list, the permit point is the big one in Philly, pull them before you open walls, getting caught mid-job costs way more time than the permit ever does. One I'd add from the sale side, if you're going to refi or sell down the road appraisers and buyers care about layout, bedroom count and baths way more than finishes, so spend there. Adding a unit is great but check zoning before it goes in the budget

    • Rental Property Investor · Boston, MA · Member since 2021 · 24 posts · 10 votes
      2d

      Joe! Great to hear from you, and small world!

      Your dad did the work on my Philly property, and he and his whole crew were great: quality work and a great attitude the whole way through. I wish I had you guys over here in Boston... Also, if I remember right, your group ended up selling the house for me too, haha.

      You’re right on both points. Pulling permits before opening walls mattered on that job, and I’ll get into the facade issue in my next post. On layout over finishes, my first property proved your point. The half bath I added did more for the value than the higher-end finishes I picked, which the appraiser really didn’t credit and tenants didn’t treat any better.

      Lesson learned: spend on layout, keep finishes rental-grade.

  • Noah WrightBusiness Member
    Lender · USA, Nationwide · Member since 2024 · 613 posts · 174 votes
    2d

    That's the right lesson, and having the half bath prove it on your own deal beats any rule of thumb. The finishes didn't land because of how the appraisal is built. Condition and quality get rated separately. A fresh, clean rental-grade reno moves the condition rating, and the comps adjust for that. Finish tier moves the quality rating, which appraisers usually won't put above what the neighborhood's comps support, so a high-end upgrade has nowhere to show up. Bath and bedroom count get their own line on the comp grid, which is why the half bath paid. On a DSCR refinance that appraised value sets the loan alongside the rent. Is the next Boston deal a single or a two-family? On a multi, unit mix and rents carry more of the value story.

Join the conversationCreate a free account to reply, vote on answers and follow this thread.