Own 4 paid-off lots in Upstate SC: best way to finance spec builds and scale

Own 4 paid-off lots in Upstate SC: best way to finance spec builds and scale

SC · Member since 2024 · 8 posts · 3 votes

Hey Guys,

I'm a real estate investor in South Carolina. I own 4 paid-off lots in Upstate SC and plan to build 1,300–1,600 sq ft spec homes on them to sell. Then I want to roll the profits into a larger project in a different area, possibly the Myrtle Beach/Conway side of Horry County. I'm putting my financing together and would love leads and lessons from people who have done this.

What I've looked at so far:

  • National private lenders (Lima One, Kiavi, Easy Street, etc.): up to 90% of cost, but around 9–10% plus 1–2 points for newer builders

  • Local banks and credit unions: closer to prime + 1 with about 1 point, but with about 20% down and more paperwork

Using the lots I already own

  • The lots are free and clear. Which lenders count that land as my down payment, so I bring little or no cash to closing?

  • Should I put all 4 lots on one loan or builder line, or finance one build at a time?

  • Build 1–2 first to prove the numbers, or start all 4 together?

  • For homes this size in Upstate SC, what are you seeing for build cost per sq ft and sale prices?

Traditional leads

  • Upstate SC community banks or credit unions that like spec construction and offer a builder line of credit

  • Loan officers who are good on draws and turnaround times

  • Banks in Horry County that will work with me once I have completed builds to show

Creative leads

  • Private money lenders active in SC, and what terms you've seen

  • JV or equity partner setups for the bigger project: money partner plus builder splits, preferred returns

  • Lot seller financing or subordination for the next project's land

  • HELOC, a portfolio line or an SDIRA/Solo 401k for down payment or gap funding

  • Gap or mezzanine funding on top of a first-position construction loan

Spec-specific questions

  1. How did you get past the "no track record" problem on your first builds?

  2. Starter-size homes in the Upstate sell for less, and lenders cap the loan at 70–75% of finished value. How do you keep enough money in the loan?

  3. What do you budget for interest reserves, contingency and carrying costs if the home takes longer to sell?

  4. Any lessons on draw schedules, inspection fees or prepayment/minimum-interest traps to avoid?

  5. Have you pre-sold or used builder-to-buyer contracts to get better bank terms?

  6. One LLC per project or one builder entity, and how does that affect lending as you scale?

  7. For those who moved from a few specs to a bigger project, what did your financing look like at that step, and what do you wish you'd known?

I'd also welcome GC, surveyor or closing attorney recommendations in Upstate SC or Horry County.

Thanks in advance. I'm happy to share what I learn back on this thread.

— Rudy

3Reply
701 views

Most Popular Reply

Lender · Milwaukee, WI · Member since 2026 · 23 posts · 16 votes
2d

Rudy, free-and-clear lots are your biggest advantage here, so structure everything around them. A few things from the lending side:

Land as equity. Most banks and many private lenders will count lot equity toward your down payment. If you've owned the lots more than about 12 months, they usually use the appraised as-is value instead of what you paid. If a lot appraises at $60K and the build budget is $250K, an 80% loan-to-cost bank loan wants $62K of equity on a $310K total cost, and the lot covers almost all of it. The catch is that they also cap the loan at 70-75% of the as-completed appraisal, so whichever number is lower wins. Get a realtor-backed comp set before you talk to lenders, and run both tests on each house.

One at a time vs. all four. With no track record, I'd build one or two first. A bank that hasn't seen you finish a house won't give you a builder line. After one or two clean builds on time and on budget, the same bank is far more likely to offer a line or approve several houses at once. Keep each lot as its own collateral rather than cross-collateralizing all four. That way a slow sale on one house doesn't tie up the others.

Getting past "no track record." Lenders mostly want to know someone experienced is running the build. A licensed GC with a real spec history, a fixed-price or detailed cost-plus contract, and a contingency of 10% or more go a long way. Your personal liquidity matters too. Plan on 6-9 months of interest and carry in the bank, even if the lot covers your equity.

Budget for the slow sale. Build in an interest reserve plus 3-4 months of carry past your expected sale date: interest, taxes, insurance and utilities. Spec loans are usually 12-18 months, so ask what extensions cost before you sign.

Traps to ask about: draw inspection fees per draw, whether interest is charged on the full commitment or only on what's been drawn, minimum-interest or exit fees on the private loans, and how fast draws actually fund. Slow draws cost you subs.

On the bigger Horry County project: your completed builds, sale prices and the profit you roll forward become the track record. That's when a JV with a money partner, or lot seller financing with a subordination clause, actually gets you better terms instead of just more expensive money.

See this reply in the discussion

26 Replies

Jump to latestLatest
  • Lender · Milwaukee, WI · Member since 2026 · 23 posts · 16 votes
    2d

    Rudy, free-and-clear lots are your biggest advantage here, so structure everything around them. A few things from the lending side:

    Land as equity. Most banks and many private lenders will count lot equity toward your down payment. If you've owned the lots more than about 12 months, they usually use the appraised as-is value instead of what you paid. If a lot appraises at $60K and the build budget is $250K, an 80% loan-to-cost bank loan wants $62K of equity on a $310K total cost, and the lot covers almost all of it. The catch is that they also cap the loan at 70-75% of the as-completed appraisal, so whichever number is lower wins. Get a realtor-backed comp set before you talk to lenders, and run both tests on each house.

    One at a time vs. all four. With no track record, I'd build one or two first. A bank that hasn't seen you finish a house won't give you a builder line. After one or two clean builds on time and on budget, the same bank is far more likely to offer a line or approve several houses at once. Keep each lot as its own collateral rather than cross-collateralizing all four. That way a slow sale on one house doesn't tie up the others.

    Getting past "no track record." Lenders mostly want to know someone experienced is running the build. A licensed GC with a real spec history, a fixed-price or detailed cost-plus contract, and a contingency of 10% or more go a long way. Your personal liquidity matters too. Plan on 6-9 months of interest and carry in the bank, even if the lot covers your equity.

    Budget for the slow sale. Build in an interest reserve plus 3-4 months of carry past your expected sale date: interest, taxes, insurance and utilities. Spec loans are usually 12-18 months, so ask what extensions cost before you sign.

    Traps to ask about: draw inspection fees per draw, whether interest is charged on the full commitment or only on what's been drawn, minimum-interest or exit fees on the private loans, and how fast draws actually fund. Slow draws cost you subs.

    On the bigger Horry County project: your completed builds, sale prices and the profit you roll forward become the track record. That's when a JV with a money partner, or lot seller financing with a subordination clause, actually gets you better terms instead of just more expensive money.

    • SC · Member since 2024 · 8 posts · 3 votes
      2d

      Rickey,

      Thank you for the quick and thorough response. I am very new to the solo investing side of real estate but am a project manager for an investor with 10-15 new builds over the past year. The financing is where my biggest hurdle is at the moment (I'm sure this is the case with most investors starting out). Currently looking at selling one of the lots to get my money out of the deal and then have 3 lots to leverage and use as I see fit.

      A few follow-ups if you don't mind

      1. For starter-size specs, what cost per square foot are you seeing hold up in appraisals right now?

      2. When you vet a GC for a newer investor, what do lenders want to see beyond a license and a spec history? References, financials, completed projects?

      3. On extensions, what’s a typical fee? And do banks generally let you renew a spec loan, or do they push for a price cut first?

    • Lender · Milwaukee, WI · Member since 2026 · 23 posts · 16 votes
      1d

      Rudy, happy to. Your PM experience on those builds is a real plus, so document it.

      Cost per square foot: I wouldn't go by a number from someone outside your market. Have your builder price a plan, then pull new-construction sales of similar size within a mile or two from the last 6 to 12 months. The lender's appraiser will do exactly that. If your all-in cost (lot, hard costs, soft costs, interest) is under about 75% of what those comps support, you have a deal a lender can work with.

      GC vetting: beyond the license and spec history, expect lenders to ask for a resume of completed homes with addresses and sale prices, proof of builder's risk and GL insurance, a detailed line-item budget, and sometimes references from subs or a past lender. Some will want the GC's financials or a credit check, especially if he's on the loan or guaranteeing completion.

      Extensions: most bank and private spec loans include one or two 3 to 6 month extension options, usually for a fee somewhere around 0.25% to 1% of the loan, as long as the loan is current and the project is on track. If the house is finished but hasn't sold, the bank will usually want an updated appraisal and to see that the list price is realistic. Being asked to cut the price is common. Being refused an extension outright is less common if you've kept them in the loop. Ask about extension terms up front and get them in the commitment letter.

      On selling one lot: run the numbers both ways first. That lot's equity may do more as a down payment on build #2 than as cash in hand.

  • Devin PetersonBusiness Member
    Lender · Sarasota, FL · Member since 2022 · 2k+ posts · 699 votes
    2d

    Rudy, owning the 4 lots free and clear puts you in a better spot than most first-time spec builders. A few thoughts on the financing side:

    Lot as equity: a lot of construction lenders, banks and private, will count the land toward your equity requirement instead of cash down. How they value it varies. Some use appraised value, some use what you paid if you've owned it less than a year or so, so ask each lender that question up front. If the lot value covers the equity they want on total cost, you may bring little cash to closing beyond closing costs and reserves.

    One at a time vs all 4: with no track record, most lenders will start you on 1, maybe 2 houses, and open up more once you've completed and sold one. Building 1-2 first also lets you prove your real cost per sqft and sale price before you have 4 houses on the market at once. Keeping each lot on its own loan also leaves the other lots unencumbered instead of tying everything together.

    Leverage caps: expect the loan to be limited by whichever is lower, a percent of total cost or a percent of the as-completed value (the 70-75% you mentioned is common). Run your numbers both ways so you know which one actually limits you.

    Budget items people miss: an interest reserve (or plan to cover monthly interest during the build), a contingency of around 10%, draw inspection fees, and draw timing. Most lenders fund draws after the work is inspected, so you or your builder float each phase. Ask how fast they turn draws around, it matters more than people think.

    Prepay: on short-term spec loans, check for minimum interest or exit fees, since you'll pay off as soon as the house sells.

    Track record: bringing in an experienced builder or GC as a partner on the first one, or a JV, is the most common way lenders get comfortable with a new builder.

    Good luck with it.

    • SC · Member since 2024 · 8 posts · 3 votes
      2d

      Devin, thank you for the response and the insightful information. The builder I am partnering with has around 20+ years of spec home experience and has built a reputable business with other investors. As a project manager, it has been nice to be on the vertical side of construction and has given me an appreciation for scheduling and budgets staying on track. The financing side of these deals is very new to me as the investor I am working for has practically funded all 10+ of the single family projects via cash. I do not have any experience with financing on anything other than my student loans, so I know this process will have a learning curve (especially the first 2 or 3).

      A couple follow up questions if you don't mind,

      1. When a lender uses appraised value for the lot, do they usually order a separate lot appraisal, or pull it from the as-completed appraisal?

      2. After the first house sells, do lenders want it fully closed out before approving the next one, or will they overlap if the first is under contract?

      3. On floating each phase until a draw funds, what’s a realistic amount of cash to keep on hand for a starter-size spec (1,300–1,600 sq ft)?

      4. If I bring in an experienced builder, does the lender usually need them on the loan as a guarantor, or is a solid GC contract plus their track record enough?

      Thanks again Devin!

  • Member since 2026 · 52 posts · 9 votes
    2d

    Great plan, Rudy. Owning 4 lots free and clear puts you in a strong spot. A lot of construction and spec-build lenders will count your land equity toward the down payment, so you may need very little cash at closing. Whether to put all 4 on one loan or go one at a time mostly comes down to your build experience and how you want the draws to work. Starting with 1–2 homes and then scaling usually gets you better terms on the next round. I'm a mortgage broker and work with a number of construction and investor lenders. If you want to send me your lot locations and build budget, I'm happy to map out a couple of options. – Stephen

    • SC · Member since 2024 · 8 posts · 3 votes
      2d

      Stephen, thanks for the response and giving me a couple scenarios to think about. I would love to send you info of what we have and the budget/plans for each home build!

  • Chris ColtonPro Member
    Investor · San Antonio, TX · Member since 2026 · 239 posts · 90 votes
    1d

    Hi Rudy, I am still learning myself, and I have been asking lenders a lot of these same questions lately while I build my own lender list here in San Antonio.

    The one thing I would get in writing before I signed anything is how the draws work. How fast the money comes back after each stage, what each draw and inspection costs, and whether your lot equity counts toward what you have to bring. That timing matters a lot when you are floating each phase out of your own pocket, and a slow draw can stall a build fast.

    Building one first to prove the numbers sounds like the right call to me. Good luck with the first build.

    • SC · Member since 2024 · 8 posts · 3 votes
      1d

      Thanks Chris! I appreciate it. Getting the draw terms in writing is great advice. I'm adding turnaround time, the cost of each draw and inspection, and how lot equity is credited to my list of must-ask questions for every lender.

      Sounds like we're at a similar stage. Since San Antonio and SC are different markets, our local banks won't overlap, but a lot of the national construction lenders cover both. If you've talked with any of them (Lima One, Kiavi, Easy Street, etc.), I'd love to hear how their draw process actually went compared to what they advertise. I'm happy to share what I hear back from lenders on my end too.

      Good luck with your build as well!

      Rudy

  • Lender · Miami, FL · Member since 2026 · 43 posts · 15 votes
    1d

    Hi @Rudy Gore hope all is well. private lender here, similar to Kiavi and Lima One.

    Free and clear land counts as equity, so your cash to close can be low. We'll order a local third-party appraisal for the most accurate As-is land value and the completed value (ARV), not a desktop review.

    Regarding experience, we'll need to see that your partnering with a GC with several ground-up completions in the last three years. You mentioned being project manager, so your past projects will grant you that experience.

    Our ARV limit is between 70-75%, which protects you from over leveraging.

    Interest reserves can be built into the loan, and draws are inspected in person and funded about two days after request.

    Happy to answer more questions. Sent you an invite to connect,

  • Owen RosenBusiness Member
    Professional · Clinton Township, MI · Member since 2015 · 747 posts · 276 votes
    1d

    One thing to line up early: builder's risk insurance for each build, plus general liability for you as the builder. Most construction lenders require both before the first draw, and the policy terms (vacancy, theft of materials, how long until it's sold) vary a lot. Get quotes alongside your loan terms so the carry numbers are real. In Horry County, coastal wind and flood exposure will move those numbers more than you'd expect.

    Royal Oath Insurance Group4.9211 Reviews
    • SC · Member since 2024 · 8 posts · 3 votes
      1d

      Owen, thanks for the response and the connection. The builder I am partnering with has general liability and we've received builder's risk policies for all the projects that we've completed so far. Getting the quotes before hand is a good idea and will allow me to incorporate this into our proforma. Wanting to go out into northern Horry County so wind and flood may not be a factor, I will double check though!

  • Lender · Phoenix Arizona · Member since 2018 · 99 posts · 52 votes
    1d

    Rudy, your project management experience on those 10–15 builds is worth documenting alongside your builder’s track record. That gives a lender a much better picture than simply calling this your first build. I’d also compare the financing with the lot equity included before deciding to sell one of the lots.

  • Lender · Houston, TX · Member since 2026 · 149 posts · 44 votes
    1d

    Four paid-off lots is a strong spot to build from, Rudy. Free and clear land can often do a lot of the heavy lifting on the down payment side, so you may need less cash than you think. We do spec construction loans, so message me and let's map out the first builds.

  • Christian LeonBusiness Member
    Lender · Miami, FL · Member since 2026 · 27 posts · 15 votes
    1d

    On the appraisal question, in my experience it's usually one report that gives you both numbers, the as-is value of the lot and the as-completed value of the house. The lot gets credited at that as-is value, not what you paid for it, so if those lots have gone up since you bought them that works in your favor. Since you've got 4 free and clear, it's also worth asking whether a lender will take a second lot as extra collateral on the first build. That can cover the equity piece and let you keep more cash in reserve. I'd still start with 1 or 2 though. Your first sale is the track record the next lender is going to want to see.

    Trato Lending510 Reviews
  • Lender · Vernon, CT · Member since 2026 · 30 posts · 5 votes
    1d

    Devin and Rickey covered just about everything, but I'd recommend one LLC per property.
    Always cleaner if anything happens to one of the projects.

    Insurance claims, short sales, any kind of litigation at all. You're way more protected if you split them into different LLCs.
    And most lenders are going to count them as experience regardless. You'd just need to show ownership in each LLC, which should be easy.

    • SC · Member since 2024 · 8 posts · 3 votes
      23h

      Stephen thank you for the suggestion. Once we finalize what we are going to do with them we will separate them out into their respective LLCs. The investor that I work for does this with all of his properties so I am very familiar with the process.

  • Ryan BakerBusiness Member
    Lender · Strongsville / Cleveland, OH · Member since 2026 · 200 posts · 54 votes
    1d

    Rudy, owning four free and clear lots helps you a lot. Many construction lenders count the land equity as your down payment, so you can often bring little or no cash to closing on the first build. The lender looks at the lot value plus the build cost against the finished value, and most cap that around 70 to 75% of the finished value.

    I'd start with one or two builds, not all four, so you have a finished track record before you ask for a bigger line. Keep a real interest reserve and contingency in the budget, because a slow sale is what hurts spec builders. A lender who handles draws fast matters more than a point of difference in cost.

    I do construction loans in-house along with every other loan type. Give me a call (my number's in my signature below) and we can run your lot values and build costs.

    – Ryan

  • Erik EstradaBusiness Member
    Lender · Los Angeles, CA · Member since 2022 · 7k+ posts · 1k+ votes
    1d

    Owning the lots free and clear is your biggest advantage. Many construction lenders will count the lot's appraised value as your equity, so you may bring little or no cash on each build. Ask every lender how they treat land equity, because it varies a lot.

    I'd start with one loan per house and run one or two builds at a time. After two or three completed sales, you'll have the track record to get a builder line or a multi-house facility on better terms. Avoid cross-collateralizing all four lots on one loan early on, so a delay on one house doesn't tie up the others.

    When comparing quotes, look past the rate:

    • Is interest charged only on what's been drawn, or on the full loan amount?

    • Draw inspection fees and how fast draws are funded

    • Extension fees if a build runs long

    • Points at closing

    A bank at prime plus 1 is cheaper if they'll accept your lot equity in place of the 20% down. The 9-10% private lenders win on speed, leverage and fewer restrictions on spec homes.

    LuxePrivate Investments LLC 571 Reviews
  • Lender · Cartersville, GA · Member since 2026 · 37 posts · 11 votes
    1d

    Rudy, free-and-clear lots are real equity, and the right construction lender will count the land toward your down payment, so you bring little or no cash to closing. Whether to put all 4 lots on one loan or one at a time depends on how fast you can build and sell, and I can run it both ways for you. I place spec construction loans through my lending partners. Message me the lot locations, what each house costs to build and what you think it sells for, and I'll tell you what I can place.

  • Technology · New York, NY · Member since 2026 · 78 posts · 23 votes
    1d

    Rudy, Rickey and Devin have the mechanics right. Here is the arithmetic that actually decides it.

    Run both constraints on every house. At a $60K lot and $250K build, all-in cost is $310K. 80% LTC funds $248K. 75% of a $380K as-completed appraisal funds $285K. LTC binds, so lot equity is real but not free: you are still $62K of cost out of pocket, and that is what your liquidity must survive. If you ever hold one, a 1.25 DSCR floor at a 7.5% 25-year is a 0.089 debt constant, roughly $310K of proceeds on $27.6K of rent. The exit assumption is the whole deal.

    Price carry on the S-curve, not the average. At 10% and 1.5 points on $248K, interest is $2,067 a month, near zero through permitting and sitework, peaking between CO and closing. Eight months vertical plus three marketing is about $23K interest and $4K points, 8.5% of cost. Reserve to the peak month and through month 15.

    On Horry County, do not underwrite pads at zero. Water, sewer, storm and paving run $45K to $65K per pad before vertical. That line is where scale projects die.

    Two builds, one LLC each, no cross-collateralization. Four specs in a 1,300 to 1,600 foot band means bidding against yourself.

    What is your all-in basis per foot on the first two, and what does the 75% LTARV test return against comps closed in the last six months?

  • Rosey FlahertyPro Member
    Accountant · Boston, MA · Member since 2026 · 33 posts · 12 votes
    1d

    Lending is well covered above, so here’s the tax piece, since it affects rolling profits into the bigger project.

    • Spec homes built to sell are dealer property (inventory). The profit is ordinary income, not capital gain, and if you build in your own name or through an LLC taxed as a partnership, it's also subject to self employment tax.

    • Because it’s inventory, a 1031 isn’t available. The profits you roll into the Horry County project will be taxed first, so budget for that cash.

    • Interest, property taxes and other build-period costs generally get capitalized into each house and recovered at sale, not deducted as you go.

    On entities: a common setup is one operating builder entity (often an S corp for the self employment tax savings) plus separate LLCs per project for liability.

    • SC · Member since 2024 · 8 posts · 3 votes
      23h

      Thank you for the recommendations Rosey. I have not mapped out the tax implications fully yet so getting some of this information on the front end sure does help. We are looking at all options to get the structural set up in place before we begin.

  • Lender · Southern California · Member since 2024 · 23 posts · 1 vote
    14h

    Hi Rudy, owning the lots free and clear is a strong starting point:

    1. Land as equity. Many construction lenders count the value of a lot you own toward your down payment. With paid-off lots, you may bring little or no cash for the land, though most will still want reserves for interest during the build.

    2. Start with one or two. Lenders like to see your first spec sell before funding several at once. Build one or two, show the sale, then scale.

    3. Builder lines. Once you have a track record, a revolving builder line can fund several homes at once without separate loans.

    4. Your package. Plans, permits, a detailed budget, a licensed GC, comps for 1,300 to 1,600 sq ft new builds and a timeline.

    5. The larger Horry County project. A JV with a capital partner, or a contractor partner who brings capital or works at cost, can cover the gap until you have more history.

    Happy to look at the numbers on the first lot if you share expected cost and sale price.

    Darryl Bolton

    NEXA Lending | NMLS #1501190

  • Lender · Tampa, FL · Member since 2018 · 23 posts · 4 votes
    11h

    Rudy, great list of questions. Full disclosure, I'm a private lender and we lend in SC, so read this with that in mind.

    On the lots: most private construction lenders will count free and clear land toward your equity at appraised value (or at cost if you bought it in the last 12 months or so). On a build of this size, a lot can cover most or all of what you'd otherwise bring to closing. Get that in writing on the term sheet before you pay for an appraisal.

    One build or four: I'd start with one or two. Your first completed sale is the track record every bank in Horry County will ask for, and it lets you tighten your cost per foot before you commit all four lots. Putting all four on one loan also means a delay on one house can hold up lien releases on the others.

    Budget items people miss: interest reserve for the build plus 4 to 6 months on the market, a 10% contingency, and draw inspection fees. Ask every lender how many days it takes to fund a draw after inspection. That number will matter more to your subs than half a point of rate. Most subs get paid on Friday, a GC typically fronts this for a month. If Draws take longer than that, you can start to run into issues.

    Happy to compare notes on the budget if it helps.

  • Ashish AcharyaBusiness Member
    CPA, CFP®, PFS · Sarasota, FL · Member since 2017 · 5k+ posts · 3k+ votes
    2h

    Owning the lots free and clear puts you in a much stronger spot than most first-time spec builders. Before the first draw, though, I’d look at a few tax decisions that are much harder to change later.

    If you've held those lots as an investment for a while, the appreciation so far could qualify as capital gain. Once you build and sell, the whole profit, lot included, becomes dealer income. Some builders lock in the appreciation to date by selling the lots to their own building entity, often an S-corp, before construction starts, at an appraised value and structured carefully. That way only the construction profit is taxed as business income, and in South Carolina the land piece also picks up the state's 44% capital gain deduction. The building profit itself is ordinary income plus self-employment tax, and the right entity structure (LLC vs. S-corp) helps you save taxes on active, non-passive ordinary income.

    There are two traps on your funding list. First, spec homes are held for sale, so a 1031 can’t roll those profits into the Horry County project. Those gains are taxed first, so plan your reinvestment around after-tax cash. Second, using your SDIRA or Solo 401k to fund or lend to your own project is a prohibited transaction that can blow up the whole account. A Solo 401k participant loan, up to $50K, is the one way to tap it, and it has to be repaid on schedule.

    Feel free to DM me, I’d be happy to share a few resources that might help.

    INVESTOR FRIENDLY CPA®4.9242 Reviews
    TaxMD® | Tax Planning Software
Join the conversationCreate a free account to reply, vote on answers and follow this thread.