Proper property insurance is a critical requirement for DSCR Lenders. While the primary risk evaluated by DSCR Lenders is the risk of borrower default, i.e. failure to make payments of interest and principal on the loan, the biggest risk facing a DSCR Lender is different.  In the case of default, the lender still has the opportunity (and likelihood) of being “made whole” or getting paid back through the foreclosure process; gaining ownership of the property and selling it for proceeds above what is due.  The biggest actual risk for a DSCR Lender is that the property itself loses its value and is not available to be foreclosed upon in case of default.  This can generally happen in two ways; either there is another party that has higher priority lien on the property (such as a governmental taxing authority or undisclosed lien holder) or that the property itself is destroyed or significantly damaged, and it is uninsured if this occurs.  

If a property is destroyed or damaged and doesn’t have property insurance (where an insurer is required to provide cash payment in case of damage), then the DSCR Lender faces a catastrophic loss without the ability to foreclose on a property with a value near the loan amount due. Because of this risk, most DSCR Lenders require property insurance escrows (i.e. the borrower must have the servicer manage payment and insurance) and have strict and extensive documentation requirements around property insurance to make sure that the property (and its value) is fully insured and nothing is out of order in case a claim is needed.

Borrowers are generally expected to provide two distinct but related items for property insurance requirements.  First is Evidence of Insurance, which is the documentation showing that the property is properly insured and includes needed coverages, coverage amounts and accurate ownership and lender information.  Second is Evidence of Insurance Payment (Invoice), which includes the insurance amount and confirms either payment or that the insurance will be paid at loan closing (and feature on the settlement statement).

Core Property Insurance Documentation Supplied by the Borrower for DSCR Loans

The Evidence of Insurance documentation requirement for DSCR Loans will typically include multiple acceptable forms of documentation.  These can include:

• Policy Declaration Page: This is the primary summary page of an issued insurance policy. It lists the named insured, property address, policy number, coverage amounts, covered perils, deductibles, and policy dates. This is the most common document provided when insurance is already in force, such as in refinance transactions or when the borrower has arranged and paid for the policy well before closing.

• Evidence of Insurance Certificate: This is a document prepared by your insurance agent confirming that the property is insured under a policy meeting the lender’s requirements. While not as detailed as the full policy or declaration page, it still includes the key data fields DSCR Lenders require such as named insured, property address, coverage dates, coverage amount, and mortgagee clause. It's often used when the policy is in place but the full declaration page isn’t immediately available.  The (Evidence of Property Insurance document), contains all of the required fields for a DSCR Lender and is available for all insurance agents to complete.  If an insurance agent submits an Acord Form 24, they will need to spell out the mortgagee clause for the DSCR Lender to accept it as this form only contains a “Certificate Holder” field, which is not the same status as a “mortgagee.” 

• Insurance Binder: This is a temporary contract issued by your insurer or agent that provides proof of coverage until the formal policy is generated. It contains the essential policy terms, including coverage type, limits, effective dates, and mortgagee clause, but is valid for a limited period (commonly 30 days). Binders are frequently used in acquisition transactions where the policy will be activated and paid at closing of the transaction. Note that the full "bound policy" will need to be submitted to the DSCR Lender when it is available after closing.

Required Data Fields for DSCR Loan Property Insurance Documentation

The key aspect of the Evidence of Insurance requirement for property insurance documentation on DSCR Loans is Required Data Fields must be on the documentation, whether utilizing a policy declaration page, evidence of insurance certificate or an insurance binder.  These Property Insurance required data fields include:

• Named Insured refers to the owner (or to-be owner) of the property and who is receiving the insurance.  It must exactly match the name of the title-holding entity as it will appear on the recorded deed. If you are holding title in an LLC, the LLC's legal name must appear here and if an individual or individuals are taking title, the individuals' full legal name must match exactly.

• Mismatches between insured name and vesting are one of the most common property insurance-related closing delays for DSCR Loans, so getting this exactly right the first time is a smart move. Sponsors (guarantors) can be listed as an additional insured on the policy, but the named insured needs to match the borrower name exactly as it appears on title and other closing documents. Also, any individuals or entities that are not a part of the transaction cannot be listed as insured on the policy since DSCR Lenders do not want to risk that a claim is paid out to an individual with no legal ownership stake in the property in the event of a loss.

• Property Address is the address of the property being insured and must exactly match the address shown in the loan documents and the appraisal report. It needs to include all components such as street number, street name, directional (N/S/E/W), unit number (if applicable), city, state, and ZIP code. Even small inconsistencies, like missing a unit number or using a different ZIP code extension can make the insurance documentation invalid for a DSCR Loan and trigger required updating, which can cause damaging delays.

• Policy Number This is a unique identifier for the insurance contract. Note that on insurance binders (temporary proof of coverage), the policy number may be listed as "pending," but it must be replaced with the actual number once the final policy is issued. A "pending policy number" is typically not an issue for insurance documentation requirements for DSCR Loans.

• Coverage Dates are the insurance policy’s effective start and end dates. For acquisition transactions, the start date generally must be on or before the closing date, and the end date must be at least 12 months later. For refinances, the end date must typically be at least 45 days beyond the closing date or you must provide a renewal policy. Because closing dates for DSCR Loans can often push, it can be smart move to get a renewal if this deadline is approaching (i.e. within 90 days even if the limit is 45), just to be on the safe side and to avoid further delays if the deal moves dates.

• Coverage Amount is the total coverage limit for the property's "improvements" (structures, not land). For DSCR Loans, this amount must typically meet or exceed 100% of the property’s replacement cost, or the cost to rebuild the structure using current materials and labor or at least the loan amount if that amount is 80% or more of property’s insurable replacement cost.  The property’s insurable replacement cost is the amount established by the property insurer, not the appraiser (the appraisal might in addition to market value, include an “estimated cost to build new” or version of replacement cost). Note that replacement cost is almost always less than the property’s market value, because land value is excluded from this value, but not excluded from the appraised market value.  Many DSCR Lenders will require what is called a Replacement Cost Estimate (RCE) or equivalent documentation from the insurance provider to confirm the amount of coverage provided is sufficient to replace the property. There can be different state laws regarding RCE disclosures, including some states where RCEs cannot be legally released to mortgage lenders.  For DSCR Loans securing properties in these states, the insurance agent will still need to provide proof that the policy was written to 100% of replacement cost either through a letter or by writing on the Evidence of Insurance documentation.

• Deductibles are the portion of a claim the insured is responsible for paying out-of-pocket before insurance coverage applies. Industry norms for DSCR Lenders generally cap the deductible at 5% of the coverage amount for standard perils like fire, wind, or hail. Higher deductibles may be rejected or require policy changes before closing, so confirming the specific deductible limits for your DSCR Lender upfront is a smart extra step to avoid potential delays down the line.

• Mortgagee Clause is a standardized clause that names the lender (and its successors and/or assigns) as a party with a secured interest in the property. This clause ensures that if a default occurs due to the property enduring catastrophic damage covered by insurance, the DSCR Lender has first priority to be “made whole” through the insurance claim payout as a substitute for foreclosure, since foreclosure is no longer feasible on a damaged or destroyed property. The clause must match the lender’s required wording exactly, including “ISAOA” (Its Successors and/or Assigns) and “ATIMA” (As Their Interests May Appear) if specified.  Slight errors in this specific wording, such as forgetting to include the “ATIMA” or misspelling the lender’s full legal name, are a common pitfall for DSCR Loans, so spending the time to double or triple check this wording early on can save time and money!

Property Insurance Invoice or Paid Receipt for DSCR Loans

An important distinction is between the Proof of Insurance Documentation (such as the Policy Declaration Page, Evidence of Insurance Certificate and Insurance Binder) and the Proof of Insurance Payment documentation, which shows that the property insurance is live and paid for.  Without this documentation of property insurance payment, the insurance documents are just proof of an insurance offer and quote, but without that, they are just that and not an actual policy in place if the insurance company doesn’t receive payment!

Amount of Property Insurance Coverage Needed for DSCR Loans

How much property insurance coverage is needed for a DSCR Loan is another point of confusion for some investors.  Since rental properties typically have a value based on a combination of the value of the property itself (called “improvements” in real estate technical lingo) and the land it sits on, the property insurance value needs to cover the value of the property (or “improvements”) only, and not the value of the land.  This is logical, since in the case the property is destroyed, such as if it burns down in a fire for example, the land remains, and should still retain its value. The land would of course be in the same spot, i.e. neighborhood and market, it was before the property burned down.  Thus, the property insurance provider is covering the cost to replace or rebuild the property to restore that part of the value, while the value of the land doesn’t need insurance coverage.

If your insurer suggests a policy underwritten to functional replacement cost, repair cost, or actual cash value, make sure that you have approval from your DSCR Lender as not all will accept these types of policies. They will usually be offered by insurers since they have lower premiums but they typically do not provide adequate coverage for replacing the improvement(s) to their original state.

The general rule of thumb for most all DSCR Lenders is requiring property coverage in the amount of 100% of the Property’s Replacement Cost or the Loan Amount (if equal to at least 80% of the Replacement Cost).  These numbers are specifically derived from the basic need for the lender to be able to recoup the loan amount due in case of the property getting destroyed.  If the insurance company will provide 100% of the costs to rebuild (i.e. replace the property), then the DSCR Lender has comfort that the full (i.e. 100%) value of the property will be restored and their same foreclosure rights will remain. If the insurance amount covers the loan amount only, and that includes up to 80% of the replacement value (typically lining up with the 80.0% LTV limit of most lenders), then the DSCR Lender has comfort that they will receive a payment from the insurance company of at least the loan amount due, also making them whole.

Replacement Cost Estimators (RCEs) and DSCR Loan Property Insurance Requirements

Many DSCR Lenders will require what is called a Replacement Cost Estimate (RCE) or equivalent documentation from the insurance provider to confirm the amount of coverage provided is sufficient to replace the property. There can be different state laws around property insurance disclosure requirements over whether a property insurance provider either must provide a formal RCE, may provide a formal RCE with borrower consent or even prohibited from providing an RCE.

Since these state-by-state laws and regulations can complicate DSCR Lender policies over RCE requirements (since a DSCR Lender that lends across the United States can't require a document universally when some states prohibit the release of such document legally), it can be a point of confusion for DSCR Loans. Most states, such as Texas and Florida, don't have a mandate to release it and the borrower (i.e. insured) must consent to its release to the lender. But because of the differing web of state laws and insurance company internal policies, RCE requests and requirements can become a sticking point for property insurance documentation for DSCR Loans.  A best practice for borrowers is to research RCE rules for the state you are investing in early on, and confirm requirements and policies upfront with both your insurance provider and DSCR Lender to avoid any last-minute problems over this insurance aspect down the line.  Additionally, make sure to ensure that the RCE coverage covers any recent renovations at the property, particularly when the renovations add square footage, as a common pitfall for DSCR Loans for recently renovated refinances (such as borrowers pursuing the ) is an initial RCE policy that mistakenly uses square footage information from the pre-renovations.  In these cases, the insurance policy coverage is likely to be rejected by the DSCR Lender, requiring a rework of the policy (adding unwanted time and stress to the deal).

Examples: Property Insurance Coverage Required for a DSCR Loan

Here is a quick example of how property insurance requirements may play out for a typical DSCR Loan. Consider the following values: the Purchase Price (Market Value) is $420,000 and determines that this total value is made up of the value of the land of $110,000 and the value of the “improvements” (i.e. the home) of $310,000. The borrower is taking out an 80.0% LTV DSCR Loan (standard 20% down payment) with an Original Loan Amount of $336,000 The property insurance RCE determines a Replacement Cost of $305,000 (based on square footage, materials, and local construction costs).  The required property insurance coverage is $305,000, as most DSCR Lenders will require coverage of the lesser of 100% of replacement cost ($305,000 in this example) or the loan amount, as long as it is 80% of the replacement cost ($336,000), in this case, since $305,000 is the lesser of the two numbers, it is the required amount.  Note that the $420,000 total market value (and price the buyer/borrower is paying) is not required to be insured, since the additional $115,000 in market value comes from the land, which is unaffected by perils like fire, wind, or vandalism. If the property burned down, the insurance payout would cover rebuilding the $305,000 structure; the $110,000 land would still be intact and retain its value.

Here is an additional example of how property insurance requirements may play out for a DSCR Loan where the loan amount determines the coverage. Consider the following values: the Purchase Price (Market Value) is $510,000, and the appraisal determines that this total value is made up of a land value of $140,000 and improvements value (the building) of $370,000. The borrower is taking out a 75.0% LTV DSCR Loan (25% down payment) with an Original Loan Amount of $382,500.

The property’s Replacement Cost Estimator (RCE) calculates a Replacement Cost of $400,000 based on the home’s square footage, construction type, materials, and local labor costs. In this example, 100% of Replacement Cost = $400,000 and the Loan Amount = $382,500. Since the loan amount ($382,500) is less than 100% of the replacement cost but still exceeds 80% of it ($320,000), the DSCR Lender will require property insurance coverage equal to the full loan amount of $382,500. In the event of a total loss (e.g., fire or natural disaster), the insurance payout would fully protect the DSCR Lender’s collateral position by covering at least the outstanding principal balance, while the borrower’s land value of $140,000 remains unaffected and retains its intrinsic worth.

Property Insurance Rating Requirements for DSCR Loans

Some DSCR Lenders have explicit requirements for the financial strength or credit rating of your property insurance carrier. In those cases, the lender will typically require that your insurance provider meet minimum financial stability standards as measured by a nationally recognized rating agency because an insurance policy is only as strong as the company standing behind it. If the carrier becomes insolvent, there is a risk that claims will not be paid, and both the borrower and lender face potential catastrophic loss. Since the primary risk mitigant for DSCR Lenders is to foreclose on a property in case of default; ensuring that properties are always fully insured by an insurance company that can stay in business and fulfill any necessary claims is paramount.

Many DSCR Lenders will require standards for property insurance providers and these generally mirror for minimum carrier ratings and acceptability criteria. Those requirements typically accept ratings from four different rating providers and generally include any of the following:

• “B” or better Financial Strength Rating from

• “A” or better Insurance Financial Stability Rating from .

• “BBB” or better Insurance Financial Strength Rating (IFSR) from or 

• “BBB” or better Insurance Financial Strength Rating (IFSR) from

In some cases, for state-licensed issuers, DSCR Lenders will only require being licensed and in good standing in the property's state.

What is a mortgagee clause and why is it required in DSCR Loan Property Insurance?

The Mortgagee Clause ensures that if the property suffers a covered loss, such as a fire or other catastrophe, insurance proceeds are directed in a way that protects the lender’s financial interest, not just the borrowers. Without it, an insurer could issue the claim check solely to the property owner, who could theoretically keep the funds without repairing or rebuilding, leaving the lender with only the ability to foreclose on the land or land with damaged property (i.e. a pile of rubble), likely worth well below the outstanding loan balance.

The Mortgagee Clause requires that the lender, as the holder of the first lien on the property, be named as a loss payee. In practice, this means claim proceeds are typically made payable jointly to the borrower and lender, or directly to the lender, ensuring that repairs are completed or loan balances reduced before any remaining funds are released to the borrower. This clause is a non-negotiable element of DSCR Loan insurance requirements and must match the lender’s required format exactly or else it will be sent back and made to be corrected – which can cause extra delays and headaches.  This is because any little typo or error could cause the lender to potentially fail to achieve a claim in court if it comes to a potential major insurance claim – there’s a reason DSCR Lenders are such sticklers about this!

Chart: Common Mortgagee Clause Errors

Do DSCR Lenders Require “Rent Loss” Insurance?

Some DSCR Lenders require that a rental property's insurance policy include Loss of Rents coverage (also called rent loss or business income – rental value coverage). This endorsement provides reimbursement for lost rental income if the property becomes uninhabitable due to a covered peril, such as fire, severe storm damage, or another insured event, during the time repairs are being made.

Because a property’s rental income is the intended source of covering PITIA payments for DSCR Loans, a sudden loss of that income can jeopardize the borrower's ability to make mortgage payments. Loss of Rents coverage helps ensure there will still be funds available to keep the loan current until the property is restored in the case of catastrophic damage that restricts the property from being rented and generating cash flow for a significant period.

The typical requirements for Rent Loss Insurance for DSCR Loans (when applicable) is a coverage amount equal to the underwritten monthly rent (i.e. amount used in the numerator of the DSCR ratio calculation) multiplied by a coverage period, typically six to 12 months for rental loss coverage or ALS (“actual loss sustained”) for the coverage period/period of restoration (typically up to 12 months on business income policies).  To fully document the rent loss insurance, coverage must be clearly shown on the policy’s declaration page or by a separate endorsement form.  There will typically be a line item labeled Loss of Rents, Loss of Rental Value, or Business Income – Rental. 

Although not all DSCR Lenders require Loss of Rents coverage, it’s probably required by around half of all active lenders in 2026.  Some lenders may only require it when there are high-risk loan factors present, like low qualifying credit scores or if the is thin (under or not much higher than 1.00x). Even when optional, real estate investors may want to consider adding it for added protection, particularly if reserves are limited.