All Forum Posts by: Paul James

Hi Miriam, I am always looking for equity. Flip or Hold. Please keep me on your buyers list.

@Fernando S.

Always happy to share deals. Please PM me.

Hi Russell, I would be happy to give you a few of my clients numbers that have bought from myself in the past. Please PM me if you would like contact information. 

Kind regards,

@Ronald Stark

Hope this finds you well, there are hard money lenders here in the Austin area that have Landlord programs for your specific need. They can provide hard money up front with a refinance after 90 days ( Once repairs have been made). These temp to perm loans come with 15-20-30 yr fixed refinance rates, and will usually lend 70%LTV on the front end with minimal points and interest for your acquisition. Sherman Bridge lending is one company that I know carries this type of program.

Best of luck!

Welcome to BP Jack. Look forward to seeing you around at a few meetups. Tonight there is one going on at Ables north all about wholesaling may be a good spot for you to start networking.

Cheers!

@Nicholas Foster,

    San Antonio typically favors changes from commercial to Mutli-family, of course it depends on location and current condition of building/ home. Here is the contact information that will give you the right answers.

Development Services Department

Cliff Morton

1901 South Alamo Street

210-207-1111

Off Market Property in Alta Vista II near Hildebrand and San Pedro. The after repaired price of 215K is 112/sqft which you will see is extremely conservative for this area. The property needs a full rehab but has ton of potential with 11 foot ceilings, 2 fireplaces, pocket doors and large square footage @ 1920. There are only 2 actives in our area with many houses being remodeled. 

Please contact me direct for showings or questions. 

Paul 

210-704-7121

@Benjamin Golden could be of help.

I have used both listed below:

Victor Mass:

210-468-1831

Ed Guerrero 

210-490-7100

Hope this helps, best of luck!

Paul

I am in, and happy to sponsor a portion if needed. Please PM me. @Brad Deffenbaugh