Storage Cages

[Stephen Dispensa]

Hi guys.

I have a lot of 98 storage cages with ceilings. Mostly  6'x'6'  with 8' ceilings. Some custom sizes as well. The cages are here in NY but we're willing to ship them. They're perferct for multi-family buildings that need storage space for residents in the basement. 

Shoot me a PM or email [email protected] if interested.

Here are the details:

Cages are post-panel-post system sized at 6x6 and various/custom sizes to fit. Cages HAVE CEILINGS. Heights at 8'-1". Doors equipped with keyed cylinder locksets. Includes electro-static factory paint application in gray.

Material quoted above is #10 gauge, woven carbon steel wire, 1x2 rectangular mesh welded into 1 1/4 x 1/8 angle frame.

These cages normally sell for well over $1,000 per unit and are an absolute steal at this price. Shipping included within the continental US.

More details:

Construction:

1) Wire: Constructed of 10 gauge steel wire woven into 1-1/2" diamond mesh, securely clinched to frames.

2) Vertical Frames: To be 1-1/4" x 5/8" cold rolled "C" section channels with 1/4" bolt holes 12" o.c.

3) Horizontal Frames: 1" x 1/2" cold rolled channels.

4) Center Reinforcing Bar: 1" x 1/2" cold rolled channel tenoned to side frames. All wires passed through center bar.

5) Top Capping Bar: 2-1/4" x 1" cold rolled channel with 1/4" "U" bolts long x 2'-4" oc.

6) Corner Posts: 1-1/4" x 1-1/4" angles with 1/4" bolt holes to match partition.

7) Floor Sockets: 2-1/3" high with set screw adjustment.

8) Joints mortised and tenoned.

9) Hinged Door Frames: 1/" x 1/2" channel with 1-1/4" x 1/8" flat bar cover three sides, 103/8" x 3/4" x 1/8" angle riveted to locks sid

e.

10) Doors: Each door to have 1-1/2 pairs butt hinges riveted to both door and jam.

11) Hardware: Doors shall have substantial mortise-type cylinder locks operated by key outside, recessed knob inside. Bolts, hardware and accessories shall be included for complete installation. (Lock cylinder by Section 08 70 00.)

12) Field bracing furnished by erector to underside of slab or as needed.

13) Paint: Finish - one standard shop coat - gray enamel.